three types of air conditioning systems, but its concept and design are similar. The most common components are the compressor, condenser and evaporator. The first compresses the refrigerant gas through the engine by belt transmission. It has a high pressure side and a low. The compressor inlet refrigerant takes the output of the evaporator and, in some cases, makes the tank to compress it and send it to the condenser, where heat transfer occurs absorbed within the vehicle. The condenser dissipates heat. Inside, the refrigerant gas from the compressor is hot, cooled, while cooling the gas condenses to become liquid high pressure. The evaporator is designed to absorb both heat and excess moisture. There, the hot air passes through the aluminum fins attached to tubes and excess moisture condenses on them, where the air carries the powder adheres to the wet surface of the fins. Then the water is drained to the outside.
refrigerant takes is the R134 has been successfully tested and accepted by the EPA
care for air conditioning usually leave the owner's manual directions But if you need a fix this system has no parts that can be arranged without an expert. Most failures include leaks in hoses, breaks or things like that.
But to keep it in good condition must follow the following:
When you add the coolant should be one of good quality or recommended by the manufacturer.
not use the maximum pontencia unless absolutely necessary, before turning off the engine switch off the air conditioner or air conditioning depending on what you have, let it run for a few minutes they have spent many months without being used for example in the winter.
following these tips will keep the system better.
0 comments:
Post a Comment